Address: Building 1,NO.11,3rd industrial Zone,Xinwei Village,Gongming Town,Shenzhen,China

Tel: +86 755 27435731

Fax: +86 755 86567521

E-mail: sales@lcdmaker.com

Skype1: lcdmaker
Skype2: lcdmaker1
Technology Home Technology

LCD Features and Types


LCD Features


Lightweight and slim designs

Low power consumption

Custom symbols and patterns easily included

High contrast in sunlight and wide viewing angle

Easy mounting and assembly

Wide range of applications


Liquid Crystal Display Modes

LCD Type

Color Mode

Dot Color

Background Color

Structure

TN

Gray

Black

Gray

HTN

Gray

Black

Gray
Yellow

STN

Yellow-Green

Dark Blue

Yellow-Green

Light Gray

Dark Blue

Light Gray

Blue

White

Blue

Single FSTN

Black & White
(B/W)

Black

White

Double FSTN

Black & White
(B/W)

Black

White

Type of LCD


TN Type | HTN Type | STN Type | FSTN Type | BMC Type


TN TYPE

Twisted Nematic (TN) LCD In a quiescent state, display has a 90° twist in the alignment of the liquid crystal molecules at the

transition between the surfaces of the two glass substrates.Polarizers attached to the outer surface of the substrates are

oriented to allow light to pass through the display. When activated selectively by an electric field, the activated segments

align to the field and no longer twist light passing through the display creating a contrast between on and off states.

HTN TYPE

High Performance Twisted Nematic LCD (HTN) This display has a higher twist (between that of TN & STN) giving it

increased performance over TN LCD. The viewing angle is superior to TN and has improved contrast when multiplexing

from 1/8 to 1/32 MUX. HTN has a slight yellow tint that looks good with high contrast segments. HTN has a lower cost

than STN.

STN TYPE

Supertwist Nematic LCD (STN) The structure of STN is similar to TN & HTN but with 180 to 270twist. The higher twist

gives better contrast and viewing angle for highly multiplexed applications.

A STN LCD normally has a yellow-green or grey background that is due to the optical effect called birefringence

that changes the polarization to elliptical rather than linear polarization.

FSTN TYPE

Film Compensated Supertwist Nematic LCD (FSTN) This display uses an optical retarder to eliminate elliptical polarization

from STN display. It has removes the birefringence effects and results in a black and white display. FSTN has the highest

contrast and viewing angle for high multiplexed LCD.

BMC TYPE

Black Mask Color LCD (BMC) This negative mode display is achieved by printing a back mask inside the display cell on

non-activated areas. Color inks are then printed behind the segments or images. The display is then back lighted with

incandescent, white LED or CCF lamps. The result is a high contrast, wide viewing angle and color display.







Reflective Type

* Requires ambient light

Transmissive Type

* Requires backlight

Transflective Type

* Uses ambient and/or backlighting

Connector and Mounting Methods


Rubber Connector

Structure

Connecting

Method

Pitch

Pin Connector

Structure

Connecting

Method

Pitch

Heat Seal Connector

Structure

Connecting

Method

Pitch

TAB
(Tape Automatic Bonding)

Structure

Connecting

Method

Pitch

COG
(Chip On Glass)

Structure

Connecting

Method

Pitch